ULTRAFAST FAST DRY FLOORS
1-Day Floors! Apply and Use Instantly or In Hours. Install Your Floor Today… Use It Today!
Armorpoxy UltraFast / Ultra Low Temp Floor Coating Systems
Armorpoxy UltraFast is a series of two different revolutionary proprietary floor coating systems where specific needs such as immediate back-in-service times, outdoor use or a very low temperature applications are required. UltraFast is the next generation beyond epoxies using NASA-formulated copolymers, UV cured resins, and polyaspartic formulations to achieve amazing floor coating results with minimal or no downtime. UltraFast is great for commercial kitchens, bakeries, airports, prisons, cafeterias, garages (where you can’t leave your ’stuff’ outside overnight), low temperature situations such as coolers and freezers, warehouses and garages that are cold and have no heat, factories & industrial use where the normal 3-7 day downtime of epoxies can’t be tolerated and thousands of other applications. Great for car dealers and repair shop environments that need to be ‘back to work’ quickly. Although UltraFast is more expensive than epoxies, frequently the shorter curing times make it far worth the additional expense. Ultrafast is extremely resistant to all types of acids, solvents, fuels, oils and paints. It’s almost impossible to remove. All UltraFast systems are sold as 100% complete ‘Job on a Pallet’ kits that contain all necessary prep materials, special rollers, non skid additives, frames, mixers, etc.
The Ultrafast Series comes in two different versions.
The first version is called UltraFast-ON (overnight version). Ultrafast-ON is a 2-layer system and the least expensive of the Series with prices in the $2.50/sq ft range. This system uses a special 100% solids epoxy that uses ‘accelerators’ to speed up curing. The UltraFast-ON epoxy gets applied and cures in 4-5 hours, then you apply our standard ArmorUltra Military grade topcoat which dries overnight so it can handle light foot traffic the next day. No vehicular or heavy traffic though for 3-7 days. UltraFast-ON can also be applied in temperatures down to +35 degrees. This system mixes and applies like traditional epoxies, but the epoxy layer cures much faster than standard epoxies wich must cure overnight so you lose a day until you can apply the topcoat. With the UltraFast-ON System you can apply both the same day. Decorative flecks can be applied if desired. UltraFast-ON is not designed for outdoor use since it is not UV tolerant long term like all epoxies.
The second version of UltraFast is called Ultrafast-PS. This is a special polyurea/polyaspartic system in which both layers cure quickly (Same day dry time) . UltraFast-PS is a 2-layer system and mid-priced in the $3.00 per square foot range. The first layer, the ‘epoxy’ goes down and cures in 1-2 hours, and the protective topcoat cures in 2-3 hours. This system mixes and applies like traditional epoxies, but has very short working times and is good where you need immediate vehicular and equipment back in service times in 24 hours. Typical applications for UltraFast-PS are garages (where you can’t leave personal posessions outside overnight), commercial kitchens, etc. UltraFast is UV stable for outdoor use and can be used outdoors and can be applied down to 45-50 degrees. Decorative flecks can be applied if desired too. UltraFast-PS is the next ’step up’ from epoxy coatings. UltraFast PS has superior chemical resistance to all epoxy-type coatings.
Since all jobs/projects are different, for UltraFast Systems we request that you contact us by phone (888-755-7361, M-F, 9-5 EST) or via email with job size, what type of system you want, etc and we can get you a quote normally within 30 minutes.
