ULTRAFAST FAST DRYING FLOORS
1-Day Floors! Apply and Use Within 24 Hours. Install Your Floor Today… Use It Today! Park On It Tomorrow!
Armorpoxy UltraFast / Ultra Low Temp Floor Coating System
Armorpoxy UltraFast is a revolutionary proprietary floor coating system where specific needs such as immediate back-in-service times or a very low temperature application is required. UltraFast is the next generation beyond epoxies using NASA-formulated copolymers, resins, and polyaspartic formulations to achieve amazing floor coating results with minimal downtime. UltraFast is great for garages (where you can’t leave your ’stuff’ outside overnight), low temperature situations such as coolers and freezers, warehouses and garages that are cold and have no heat, factories & industrial use where the normal 3-7 day downtime of epoxies can’t be tolerated and thousands of other applications. Great for car dealers and repair shop environments that need to be ‘back to work’ quickly. Although UltraFast is significantly more expensive than epoxy, frequently the shorter curing times (24 hrs or less) make it far worth the additional expense. Ultrafast is extremely resistant to all types of acids, solvents, fuels, oils and paints. It’s almost impossible to remove. Ultrafast is 100% UV stable and excellent for outdoor applicatons in sunlight.
Unlike traditional epoxies which are not UV tolerant, Ultrafast can be used outdoors to create a ‘terrazo’ or ‘granite’ look. The resins in Ultrafast are completely UV-resistant and can withstand many years of outdoor use. Ultrafast cannot yellow or fade, even in direct sunlight.
Now, you can start your project in the morning and put your possessions back on the coated surface in the late afternoon. That’s how fast UltraFast dries!
UltraFast is a 2-step process (2 tough layers) of very quick drying 2-component products (you simply mix A & B together). The system utilizes a coat of UltraFast Mid Coating, and UltraFast Protective topcoat. Decorative flecks/chips can be easily applied to the Mid Coating while wet to achieve a ‘terrazzo’ or ‘granite’ type look, and then the protective clear topcoat is applied. In addition, we offer a non skid additive for the topcoat layer if desired. You can even do ‘full broadcast’ fleck patterns if desired.
The application process is similar to using traditional epoxies (mix parts A & B together) and apply with roller or squeegee. The only difference is that due to the shorter working times of these products, we recommend mixing in smaller batches to avoid pre-hardening before it is properly applied. The only other difference is that the primer and mid-coating come non-pigmented, but we provide you with the liquid pigment color of your choice which mixes in easily to get the color you want. UtlraFast is available in standard base color shades of gray, beige, black, brown and blue. Thousands of other color combinations are availble on request.
CLICK HERE FOR COLORS & PRICING & TO PURCHASE
Please note that Armorpoxy UltraFast standard version can be applied down to 40 deg F. For lower temperature applications (even down to -20 degrees F), please call our office @ 1-888-755-7361 or email to info@armorpoxy.com for a prompt quote.
Contact our office for special quotes on large projects as discounts are available for project-type applications over 1,500 square feet.
