Concrete Sealer - Seal your patio, stone basement, and wood areas with ArmorProof!

Concrete Resurfacing and Concrete Sealer Products

Armorpoxy ArmorProof offers an array of concrete resurfacing and concrete sealer products to seal almost any surface! Our extreme duty long life resurfacing and sealer products are specially formulated to resist water, sun, mildew, and whatever else you can throw at us!

Bare Wood, Stone, Pavers, Masonry, Brick, Unglazed Tile - Use Armorpoxy ArmorProof special silicone and Teflon® floor sealer. This special clear water-based and environmentally safe (NO voc's) concrete sealer and floor surface sealer actually penetrates the surface and fills the pores with silicone. Special Teflon ® additive offers significant surface protection. Make sure surfaces are clean and dry. Surfaces must be porous and unpainted or otherwise sealed. Pre-treat areas if needed by power washing to remove any dirt, mildew or other foreign matter. New masonry should cure for at least 30 days prior to applying. Can be applied by a standard 'garden sprayer' or rolled on. One coat is recommended. Coverage 150-250 sq ft/gallon depending on porosity.

Wet walls and basement Walls-Use our Armorpoxy ArmorLock. ArmorLock is a bright white acrylic silicone wall or concrete sealer that offers up to 20 p.s.i water pressure retention without failure. This sealant helps to prevent inner wall sweating and moisture. ArmorLock wall and concrete sealer also reduces mold growth and helps reduce allergies. Can be used on above ground or below grade walls made of masonry, concrete, plaster, or stucco. ASTM certified for masonry wall use. Can be used on interior or exterior surfaces. Surfaces that have efflourescence, salt deposits, or similar discolorations should be cleaned first with diluted muriatic acid. After application surface can be painted with regular Armorpoxy for a beautiful shine and cover. Product cleans up with water, and is environmentally safe. Coverage starting from 75-150 sq ft/gallon depending on surface texture. Can be rolled or brushed.

Concrete floors? Use our clear Armorpoxy ArmorFloor sealer that seals concrete and prevents further disintegration, also eliminating 'dusting'. This helps in concrete resurfacing. Use on new concrete floors that you intend to paint to assure good adhesion and to reduce peeling due to moisture and hot tires. Please note that certain concrete formulations tend to 'dust,' and will cause floor coating failures if not properly sealed prior to application. Can be roll or brush installed.

Concrete Resurfacing and Concrete Sealer Products.

Click to