Concrete flooring with a 'Granite-Look' - ArmorFleck EX

click to view larger

click to view larger

ArmorPoxy is pleased to offer the fantastic ArmorGranite EX concrete flooring system. The ArmorGranite EX Concrete Flooring System is similar to the ArmorFleck system except it contains much more material, which gives the floor a 'granite' look instead of a 'terrazzo' look. (2 coats of epoxy instead of one, 4x the amount of flecks, and 2 coats of clear coat instead of 1).

This unique concrete flooring system gives your concrete floors the look of a granite stone floor without the expense and mess associated with granite. The supplied heavy duty color chips also give your floor some texture and make it less slippery when wet. Guaranteed against 'hot tire lifting' for 5 years! The ArmorGranite EX System is the same system that professional concrete flooring contractors use. Professional contractors can charge thousands per garage to install granite flooring. ArmorGranite EX is 100% UV stable and will not fade. ArmorGranite EX is great for concrete flooring in garages, basements, stores and similar applications. ArmorGranite EX is for use on concrete floors only.

The ArmorGranite EX system is 100% environmentally safe, low odor, and fully government approved in all 50 states.

Don't be fooled by systems sold at home centers that although well packaged and displayed don't contain any critical topcoat as their systems are prone to failure as the chips come right out due to 'hot tire lifting' and heavy traffic. ArmorGranite EX eliminates 'hot tire lifting' due to our multi-step process and makes your concrete flooring just like a granite floor without the mess or expense.

Our unique ArmorGranite EX's concrete flooring system is easy to apply and can be applied by anyone. Its simple and easy!

1. Clean the concrete floor well with the included surface prep kit. Kit consists of 3 steps of TSP, environmentally safe Acid Magic etching solution and more TSP. Power washing is preferred but not required).
2. Mix the two component industrial grade concrete flooring epoxy and apply the base color coat to the floor with a standard roller. Let dry 24 hours. Then, apply the second coat of epoxy. NOTE:SINCE EPOXIES CURE FAST ONLY MIX UP ½ OF THE EPOXY ON THE FIRST APPLICATION, OTHERWISE IT WILL HARDEN UP AND YOU WON'T HAVE EPOXY TO PUT DOWN THE NEXT DAY.
3. While the concrete floor is wet, apply the supplied color chips to achieve your desired effect. You can also add the supplied non-skid additive to areas where you might be extra concerned about the floor being slippery when it gets wet (by exit doors, car doors, etc.). The chips themselves give the floor some texture and non-slip properties, but you may want to add the non-skid aggregate if desired.
4. Let dry overnight.
5. Next, apply the supplied clear epoxy coat to seal in the chips and give your concrete floor the ultimate look. The following day apply the second coat of clear coat to give the floor that deep luster look of granite.
6. Let dry/cure for at least 7 days before driving on it.
7. That's it!
   

Each concrete flooring Granite-look kit contains the following items for a complete job and contains enough material to do a one car garage. Coverage is approximately 250 sq. ft. per kit. The kits contain:

• One lb of TSP powder
• 1 qt. of Acid Safe etching solution (dilutes 2:1, making 3 qts)
• 1 gal. epoxy, Part A (your choice of base coat color)
• 1 gal. of activator/hardener, Part B
• 6 lbs of colored chips
• 2 gals. of clear topcoat sealer
• Stirring sticks
• Clear grip non-skid additive
• Complete instructions

Available in the following base colors with designer-selected coordinating color chips.

Granite Pattern 1

Granite Pattern 2

Granite Pattern 3

Granite Pattern 4

Granite Pattern 5

Granite Pattern 6

Click to