ArmorFleck Maximum Duty 'Terrazo
Look' Floor System
ArmorPoxy is pleased to offer the fantastic ArmorFleck
floor system. This unique system give your floors the look of a Terrazo Floor
without the expense and mess associated with Terrazo. The supplied color chips
also give your floor some texture and make it less slippery if it gets wet. Guaranteed
against 'hot tire lifting' for 5 years! The ArmorFleck System is the same system
that professional flooring contractors use that charge thousands per garage to
install. ArmorFleck is 100% UV stable and won't fade. ArmorFleck is great for
garages, basements, stores and similar applications. ArmorFleck can be used on concrete, properly prepped painted surfaces, wood and laminates, and other similar surfaces.

click to view larger | 
click to view larger | 
click to view larger |

The ArmorFleck system is
100% environmentally safe, low odor, and fully government approved in all 50 states.
Don't
be fooled by systems sold at home centers that although well packaged and displayed
don't contain any critical topcoat as their systems are prone to failure as the
chips come right out due to 'hot tire lifting' and heavy traffic.
ArmorFleck eliminates
'hot tire lifting' due to our multi-step process.

Our unique system is easy to apply and can be applied by anyone. Its simple
and easy! - Clean the floor well (power washing is preferred but not
required).
- Mix our supplied environmentally safe floor cleaner/etcher
with water. Apply with stiff broom or mop, let stand for 15 minutes then rinse
well.
- Mix the two component industrial grade floor epoxy and apply the
base color coat to the floor with a standard roller.
- While the floor is
wet, apply the supplied color chips to achieve your desired effect. The chips
themselves give the floor some texture and non-slip propertlies.
- Let dry
overnight. Sweep next day.
- Next, apply the supplied clear epoxy coat to
seal in the chips and give your floor the ultimate look. Add our non-skid additive
for additional traction.
- Let dry/cure for at least 7 days before driving
on it.
- That's it!

click to view larger | 
click to view larger | 
click to view larger | Each 'kit' contains the following
items for a complete job and contains enough material to do a one car garage.
Coverage is approximately 250 sq. ft. per kit. The kits contain: - Liquid
Cleaner/Etcher
- 1 gallon colored epoxy, Part A (your choice of base coat
color) [1/2 gal. of A & B]
- Bag of colored chips
- 1 gal. of
clear topcoat sealer
- Bag of non skid aggregate for areas where additional
traction is desired
- Stirring sticks
See our online store to purchase.
Available in 4 designer-selected color combinations, or contact us if you have special color combo needs:
| Click to |  |
|  |