Epoxy Floor Care Cleaning

Now that you have purchased an Armorpoxy floor, we’re sure you want to keep it looking just like new! In order to keep your floor looking great, you need to do the following:

1. Wash the floor at least once a week with our Armorpoxy Floor Cleaner.
2. Re-Gloss every 12 cleanings.
3. Make sure to clean up all oil and chemical spills as soon as possible.
4. Clean spots of grease, oil and stubborn stains with Armorpoxy Floor Spot Remover
5. Avoid the use of very stiff bristle brushes, they can cause the floor to lose some shine prematurely. Use our Armorpoxy Floor Broom to avoid floor damage.
6. Keep good housekeeping practices to get rid of any stones and abrasives…these act like sandpaper under tires, forklifts, etc.
7. Re-Apply Armorpoxy Topcoat (if used) when the floor shows signs of wear.

	To CLEAN YOUR FLOOR Use Armorpoxy Concentrated Blue Floor Cleaner. Comes in a concentrate in either 8 oz bottles or 5 gallon pails. Mix 8 oz concentrate to 5 gallons water. Apply to floor, let stand for 1-2 minutes before scrubbing. DO NOT USE THE CONCENTRATE WITHOUT DILUTING. Mix only at the 8 oz/5 gal ratio. After scrubbing mop or squeegee floor. Rinse or mop well to remove any residue. Ea 5 gal mixture should clean about 1,300-1,500 square feet.
	To REMOVE SPOTS Use our Armorpoxy Floor Spot Remover. Used for tough, difficult to remove spots. Comes in 32 oz spray bottle. Simply spray on affected area, let stand for a bit, then rinse or wipe off.
	To make YOUR FLOOR SUPER GLOSSY. To make your floor shine ‘better than new’ use our special Armorpoxy Gloss Restorer Finish. Revolutionary polymer-based coating fills in minor scratches and brings back the shine and protects from stains. Not a wax. Used on firehouse floors, commercial, residential and any application with an epoxy, urethane, terrazzo, or similar non-porous smooth finish. Easy to apply. Step 1-Clean floor with our Blue Floor Cleaner. Step 2-Pour directly onto floor and spread evenly using the special Armorpoxy Gloss Broom. Do not walk on area treated for about one hour. Allow 8-10 hrs for vehicular traffic.

Click to