Renew Your Counters, Bath Tub, Kitchen and Tile Floors. Save Thousands on Remodeling.
Easy to Do Yourself!

BEFORE	AFTER
click to view larger	click to view larger
click to view larger	click to view larger
click to view larger	click to view larger

Refinish your tile floors, bathroom and kitchen with Armorpoxy!
Give new life to your old tub, sink, countertop, and tilework. Make them look brand new!

Our amazing Armorpoxy products can be used to refinish and resurface countertops, tile, floors and more.

You can resurface most any surface including countertops, tile floors, showers and tub surrounds with ArmorStone 'Stone in a Can'. This amazing product goes on easy and is a 'like new' extremely hard and durable surface. If a stone/textured look is not what you are looking for, see below for our other Armorpoxy recommendations.

ArmorGranite - this unique coating truly looks like stone and granite. Easy to apply with no special skills required. Convenient counter/small area kits available.

Resurfacing LINOLEUM AND TILE FLOORS. Our products can be applied to almost any kind of flooring including tile, vinyl, linoleum. The prep is the same for all of these surfaces. Clean WELL with Trisodium Phosphate (avail on our website) according to package directions. Rinse well. Sand lightly with a fine grit sandpaper to give the Armorpoxy some 'bite'. Clean with a tack cloth to remove any surface dust. Apply 1-2 coats of Armorpoxy. High traffic areas by doors, sinks, etc. should get two coats.

Resurfacing COUNTERTOPS & CABINETS. Laminate (Formica brand and similar) countertops can be refinished with Armorpoxy, ArmorGranite, or ArmorStone. For these surfaces clean well and apply. Lightly sand first. After application you must use a hot plate and cutting board as any coatings can be damaged by sharp objects if abused.

Resurfacing BATHROOMS. Bath floor and wall tile can be refinished with Armorpoxy, ArmorStone or ArmorGranite. Clean with TSP, sand lightly, clean with a tack cloth and apply. We DO NOT recommend standard Armorpoxy for resurfacing bath tubs, shower stalls or surrounds. For these surfaces, see below.

For bath tubs, showers, shower surrounds and other very wet areas we recommend our amazing Tub & Tile Brush On Kit. Its tough hard protective coating acts like porcelain ceramic. Beautiful white smooth glossy appearance. Has excellent wear resistance. Low-odor formula. One kit is normally enough to do a tub, so if you plan on redoing a tub and the surround, you need one kit, and one refill. The Brush On Kit can be tinted at your local paint store using the Universal Tint System that all paint stores use. This kit contains everything you need to refinish a standard tub. Buy now at our online store. The process of tub refinishing requires a good cleaning with supplied cleaner. Two coats are normally required for an excellent finish (kit contains enough materials for 2 coats). The dry time between coats is a minimum of 12 hours, but a maximum of 36 hours between coats. The bath tub or shower should not be used for about 5 days for a full super hard Armorpoxy cure.

Resurfacing TUBS, SINKS, SHOWERS & SHOWER SURROUNDS. We offer two unique refinishing kits for sinks, tubs, & showers. Both products can be used on porcelain, fiberglass or tile. Our 2-part Aerosol Spray-On Kit has everything you need to refinish a standard sink. It does not contain enough product to refinish a bath tub. The spray kit is available in white only. Hot tubs should use our ArmorPool 2-part epoxy.

Resurfacing Bath Tub

Click to