ARMOR RESTORE LIFETIME DECK COATING

MAKE YOUR DECK LIKE NEW IN A SINGLE DAY! SAVE THOUSANDS! LIFETIME WARRANTY

Now you can restore your deck instead of replacing it! Save thousands of dollars and in just a few hours bring your deck to ‘like new’ condition with Armor Restore Liquid Deck Restoring Coating. Save up to 90% of the cost of replacing your deck!

Click on photos below to enlarge them to see actual results!

Here is how Armor Restore works

-Simply clean your deck well by hosing off or power washing.

-Roll on a first coat of Armor Restore

-Wait 3-4 hours

-Apply a second coat

-Wait overnight and enjoy!

Armor Restore is a specially formulated environmentally-safe liquid coating that you apply to your decking to bring it back to life, and avoid expensive deck replacement. Armor Restore is not a paint or stain, but a 1-part (no mixing) water based coating that is designed to be applied to wood surfaces with minor surface imperfections and damage caused by moisture, UV, cracks, mold and discoloration. Armor Restore acts as a liquid resurfacing coating that ’sits’ on the deck (unlike stains or paints that soak in) and provides a brand new slip-resistant surface.

Saves money! Beautifies! Saves the environment (no disposing of your old deck in landfills)!

Replacing a deck can cost upwards of $20.00 per square foot. Armor Restore costs approximately $1.60 per square foot, so you can save up to 90% over replacing your existing deck!

Questions and Answers:

Are any special skills required to apply Armor Restore?

-No, Armor Restore just rolls on like paint. The only ’special’ thing you need to know is to use our special foam roller which allows the product to be applied rather thick to achieive the desired results.

Can I apply Armor Restore to all surfaces?

-Armor Restore can be applied to horizontal surfaces (must use our special foam roller to apply) or brushed on vertical surfaces.

Can I apply Armor Restore to painted or sealed wood?

-Yes, but those surfaces must have been painted at least 1-2 years prior. Remove by power washing any old and flaking paint as Armor Restore, like all coatings, can only stick to what is under it, so if your existing paint is peeling, it should be stripped. Pressure treated wood should be aged at least 1 year prior to coating.

Will Armor Restore ‘fix’ my deck wood?

-Armor Restore will fill in minor imperfections up to 1/4″. It it is a coating that covers splintering and disintegrating areas. It is not though ‘magic’ and can’t repair rotted or severely damaged wood or large gaps and holes. Any unsafe or rotted boards should be replaced as neccessary. If in doubt, contact a licensed contractor to review your deck

Is Armor Restore slippery?

-No, actually it is quite textured, and would not be considered ’smooth’. It is naturally non-skid and can be applied to stairs to reduce slippage.

Is Armor Restore toxic?

-No, Armor Restore is completley VOC and solvent free. It contains no toxic materials and cleans up with soap and warm water.

How much Armor Restore do I need?

-Coverage is calculated at only 80 square feet per gallon per coat (The thickness of ArmorRestore is what makes it work). So, you need to take your L x W, multiply by 2 (for 2 coats) and divide by 80 to determine the number of gallons. For a 15′ x 15′ deck you would need 9 gallons (15 x 15 = 225 sq ft. x 2 = 450 sq. feet. Divide by 80 = Rounds to 6 gallons required.

Is it normal for the surface to be somewhat ‘blotchy’ after the first coat?

-Yes, this is normal and will clear up after the second coat is applied?

How long does Armor Restore last?

-We offer a limited lifetime product replacement warranty in the event of a failure.

-What colors are available?

Standard colors that are availble are

Cape Cod Gray, Cedar, Granite, Timberline, Russet, Sandstone and Taupe (see below).

Additional Colors are available (adds 3-4 days for shipment).

CLICK HERE TO ORDER

CLICK HERE FOR ADDITIONAL COLORS